fbpx

Model Romano

European Union: € 2.550,- (incl. 21% VAT)
Outside European Union: € 2.107,- (excl. 21% VAT)
Shipping costs not included.

Model Romano is a steel string guitar, tributed to Mario Maccaferri who is the designer of this model. The guitar has a European Spruce top with the Selmer style bracing pattern. The guitar has no cutaway which increases the air volume in the sound chamber. This results in a loud, well balanced sound which is projected through the wide D shaped soundhole.

Optional

Eimers Guitars offers several options like choice of wood, hardware and finish. The guitar is also available for left handed players (no extra costs). Model Romano is standard equiped with a pickup.

Model Romano

European Union: € 2.550,-
(incl. 21% VAT)
Outside European Union: € 2.107,-
(excl. 21% VAT)
Shipping costs not included.

Model Romano is a steel string guitar, tributed to Mario Maccaferri who is the designer of this model. The guitar has a European Spruce top with the Selmer style bracing pattern. The guitar has no cutaway which increases the air volume in the sound chamber. This results in a loud, well balanced sound which is projected through the wide D shaped soundhole.

Optional

Eimers Guitars offers several options like choice of wood, hardware and finish. The guitar is also available for left handed players (no extra costs). Model Romano is standard equiped with a pickup.

Specifications

ConstructionMahogany blocks / dovetail neck joint
TopGerman spruce
Top BracesGerman spruce
Pattern5 paralel braces
LiningsKerfed, Mahogany
Top bindingSolid Indian Palisander
white/black/white veneers
RosetteMother of Pearl, Abalone, Veneer
SidesSolid Indian Palisander *
BackSolid Indian Palisander *
Back bindingSolid Indian Palisander,
white/black/white veneers
Neck3 piece French Walnut
HeadstockSlotted
NutBone
HeadplateEbony, EG logo engraved
Tuning machinesSchaller open tuners *

TailpieceReplica Selmer, brass *
Fingerboard
Ebony
Scale length67 cm
Width at the nut43 mm *
Width at the body55 mm
Frets clear14
Total frets25
Position dotsMother of Pearl (positions 5,7,9,12,17)
Finish bodyNitro Cellulose, clear
Finish topNitro Cellulose vintage yellow
BridgeEbony *
Electronics‘Big Tone’ passive piezo pickup *
StringsGalli Silk & Stell 0.11
End pin6mm jack
Included in priceHard shell case, truss rod wrench, Wegen flatpick
*see options

Options

All models presented on the website are standard delivered in a specific setup like woods, finish and hardware (tailpiece, tuners, pickup and hard shell guitar case). The options presented here will offer you the possibility to make changes to the guitar according your personal preferences. Please note that the woods I suggest for the guitars (see standard description with each model) are considered the optimal combination. A change of wood may affect the sound of the guitar. Choosing any option will affect the price. The exact additional price(s) will be written down and presented to you in the order form. I am happy to go over your wishes and discuss the possibilities.

Wood for the top

All guitars have very closed grain European Spruce (see image)

Alternatives:

  • Engleman spruce
  • Sitka spruce
  • Western Red Cedar

Wood for the back and sides

There is a large variety of hard wood and tropical wood available for building instruments. It is impossible to keep all these different woods in stock. Let me know what you are looking for and I will inform you about the possibilities. I offer both solid wood and veneers for back and sides. For solid wood guitar traditionally Indian Palisander (Rosewood) is used. Laminated guitars are made from 3 layers of veneers: an inside layer of Mahogany, middle layer of Polar and an outside (visible) layer of Brazilian Palisander (image 1, 2 and 3) or Indian Palisander (image 7 and 8).

Alternative veneers:

  • Birdseye Maple (image 6)
  • Flamed Maple (image 5)
  • Zebrano (image 4)
  • Coromandel
  • Other veneers: (call or e-mail)

Alternative solid woods:

  • Flamed Maple
  • Koa
  • Other solid woods: call or e-mail for more options

Brazilian Palisander 1

Brazilian Palisander 2

Brazilian Palisander 3

Zebrano

Flamed Maple

Birdseye Maple

Indian Palisander 1

Indian Palisander 2

Wood for the neck

Traditionally French Walnut is used for the neck on Selmer style guitars (see image). On model Quatre (Favino style) Maple is used.

Alternatives:

  • Mahogany
  • Flamed Maple
  • Other options: call or e-mail for more wood or combinations.

Finish

The traditional clear lacquer finish with nitrocellulose (image finish 1)

Alternative finishes:

  • Antique (authentic aged and used look) (image finish 2)
  • Vintage orange nitrocellulose (image finish 3)
  • Vintage yellow nitrocellulose (image finish 4)
  • Sunburst brown (image finish 5)
  • Custom finish (call or e-mail)

Finish 1

Finish 2

Finish 3

Finish 4

Finish 5

Tuning machines

Standard all guitars have Schaller ‘open’ tuners, except for the Signature models and the Antique model. These guitars have replica Selmer tuners, hand crafted by Eimers Guitars.

Alternatives:

  • Open Schaller tuners (image tuner 1 and 2)
  • Closed Schaller tuners (image tuner 3 and 6)
  • Replica Selmer style tuners (image tuner 5)
  • Stochelo Rosenberg Signature hardware (image tuner 4)
  • Waverly tuners
  • Other tuners of interest

Tuner 1

Tuner 2

Tuner 3

Tuner 4

Tuner 5

Tuner 6

Tailpieces

Traditionally on all Selmer style guitars a brass replica of the Selmer tailpiece is applied. (image tailpiece 1)

Alternatives:

  • Chrome tailpiece
  • Brass Favino style tailpiece
  • Chrome Favino style tailpiece (image tailpiece 2 and 3)
  • Custom tailpiece

Tailpiece 1

Tailpiece 2

Tailpiece 3

Pickups

Standard in most models is the ‘Big Tone’ passive piezo pickup. For the Vola acoustic bass a Fishman pickup.

Alternatives:

  • Active pickups like Fishman, LR Baggs or others
  • Microphone / piezo system

Main Menu

•   Home
•   About Eimers Guitars
•   How to order
•   Support
•   Contact

Guitars

•   Choosing your guitar
•   Options
•   Amplification

•   FAQ
•   Care & Maintenance

Eimers Guitars is

•   Selmer style
•   Hand crafted
•   Original measurements
•   Good tone & playability
•   Replica tailpiece
•   Shaller tuners

Contact

•   Fioringrasstraat 13 - 15
•   1313 LB Almere
•   The Netherlands

•   Phone +31 (0) 36 534 4808
•   info@eimersguitars.com

© 2019 EIMERS GUITARS. All rights reserved  |  Development by Vink Creative